Crosby S 421 T Wedge Sockets

Product Description

Type Approval and certification in accordance with ABS 2007 Steel Vessel Rules.1-1-17.7, and ABS Guide for Certification of Cranes.

The basket is cast steel and individually magnetic particle inspected.

Pin diameter and jaw opening allow wedge and socket to be used in conjunction with closed swage and spelter sockets.

Secures the tailor dead end of the wire rope to the wedge thus eliminates loss or Punch out of the wedge.

Eliminates the need for an extra piece of rope, and is easily installed.

The TERMINATOR wedge eliminates the potential breaking off of the tail due to fatigue.

The tail  which is secured by the base of the clip and the wedge, is left undeformed and available for reuse.

Incorporates Crosbys patented QUIC-CHECK Go and No-Go feature cast into the wedge. The proper size rope is determined when the following criteria are met:

• The wire rope should pass thru the Go hole in the wedge.
• The wire rope should NOT pass thru the No-Go hole in the wedge.
• Utilizes standard Crosby Red-U-Bolt wire rope clip.
• The 3/8 thru 1-1/8 standard S-421 wedge socket can be retrofitted with the new style TERMINATOR wedge.

Specification