Devcon Plastic Steel Putty (A)

Product Description

Devcon Plastic Steel Putty A

            Description: Devcon Plastic Steel Putty is a steel-filled epoxy putty that cures at room temperature and is designed for filling, rebuilding, and bonding metal surfaces.

Intended Use: Devcon Plastic Steel Putty is a Patching and repairing areas where welding or brazing would be undesirable or impossible

Product features: Devcon Plastic Steel Putty Applies easily to vertical surfaces, Machinable to metallic finish, Bonds to aluminium, concrete, and many other metals, Resistant to chemicals and most acids, bases, solvents, and alkalis.

Technical Properties of Devcon Plastic Steel PuttyColour Grey
Mix Ratio by Volume 2.5:1
Mix Ratio by Weight 9:1% Solids by Volume 100
Pot Life @ 75F 45 min.
Specific Volume 11.9 in.(3)/lb
Cured Shrinkage 0.0006 in./in.
Specific Gravity 2.33 gm/cc
Temperature Resistance Wet: 120 Degrees F; Dry: 250 Degrees F
Coverage/lb 48 sq. in 1/4 in
Cured Hardness 85D
Dielectric Strength 30 volts/mil
Dielectric Constant 37.5
Adhesive Tensile Shear 2800 psi
Compressive Strength 8260 psi
Modulus of Elasticity 8.5 x 10(5) psi
Flexural Strength 5600 psi
Coefficient of Thermal Expansion 48 [(in)/(in) x F)] x 10(-6)
Thermal Conductivity 1.37 (cal x cm) / (sec. x cm(2) x C) x 10 (-3)
Cure Time 16 hrs
Recoat Time 10-12 hrs
Mixed Viscosity Putty

Test Conducted :Cure Shrinkage ASTM D 2566
Adhesive Tensile Shear ASTM D 1002
Dielectric Strength, volts/mil ASTM D 149
Dielectric Constant ASTM D 150
Flexural Strength ASTM D 790
Compressive Strength ASTM D 695
Cured Hardness Shore D ASTM D 2240
Coef. of Thermal Expansion ASTM D 696
Thermal Conductivity ASTM C 177
Modulus of Elasticity ASTM D 638

Application Instructions : Spread mixed material on repair area and work firmly into substrate to ensure maximum surface contact. Plastic Steel
Devcon Putty A fully cures in 16 hours, at which time it can be machined, drilled, or painted.
Place fiberglass sheet, expanded metal, or mechanical fasteners between repair area and Plastic Steel Putty A prior to application.