Magnetic Lifter

Product Description

 Magnetic Lifter

Features:

Zero electricity required

Forged hook for high mechanical strength and durability

Precision machined assembly block in single piece to enhance efficiency

Designed for safety and lightweight

Foolproof locking system with an easy to use "on" and "off" lever

3 times rated capacity factor of safety to meet the safety standards as per international standards for under the hook devices

Test certificate for safety factor from a government-approved third party

No Maintenance and Operating cost

No damage to the workpiece being lifted

Very Compact

Benefits:

Lifting Magnets use space more effectively. Eliminates the need to gauge and increase stacking height

As less as one operator can move large and heavy workpiece safely and easily using Magnetic Lifters

Lifting Magnets save labour and time - improves productivity

Construction:

Permanent Magnet Lifters have strong magnetic field path produced by NdFeB Magnetic materials. "On" and "Off" of the magnetic path is controlled by turning the lever manually. There are shackles on the top of Magnetic Lifter for lifting.

Operating Instructions

The workpiece surface (magnetic ferrous surface) and magnet pole surface must be clean and smooth to achieve maximum efficiency. Ground and machined surface are ideal but a good clean surface on a ferrous or casting is acceptable provided a sufficiently flat area available for good magnetic contact with the work piece

There should be no air gap/inclusions between the magnet pole and the job surface

Place the magnet on the ferrous surface. Unlock the lever by pulling it out and then turn it to the position. Once it is made lock it by releasing it. For making it please follow the similar procedure. (Do not place on wooden surface OR non-magnetic surface - it will not be possible to operate Lever to position)

Move the load smoothly, avoid shocks and collisions

To place/drop the lifted material, operate the lever to the position

When not in use:

Apply Grease / Oil on Magnetic Poles surface to prevent it from rusting

Place it on a thick wooden plank to safeguard its Magnetic poles from any damages, scratches etc.

Safety Instructions:

Place the magnet on the Ferrous Surface in position and then make it. Do not make it ON without keeping it on a ferrous surface

The magnet is to be placed in the centre, i.e. centring to the centre of gravity of the load and then lift

While handling the load, no person should be allowed in the immediate danger zone

Ensure that the lever is made after resting the load at desired place in balanced position