McKissick 418 Hook Type Snatch Block

Product Description

Crosby McKissick 418 Snatch Block with hook. Unique opening feature permits insertion of rope while block is suspended from gin-pole or other mounting. Sheave runs on bronze bushing or roller bearing with integral pressure lube fitting. RFID equipped for worksite traceability.

• Opening feature permits easy insertion of rope without reeving, or while the block is suspended.
• Forged steel swivel tees, yokes and shackles.
• "All Alloy" snatch blocks feature a significant reduction in weight.
• All sizes feature sheave grooves suited for a range of wire line diameters.
• Center pin equipped with pressure lube fitting.
• Bolt for opening feature is retained, to ensure no lost bolts in the field.

Models with sheave diameters from 3" to 18" available.

Meets or exceeds all requirements of ASME B30.26, including identification, ductility, design factor, proof load and temperature requirements. Importantly, these blocks meet other critical performance requirements, including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.

* Ultimate Load is 4 times the Working Load Limit.

Available in Bronze Bushed only. 3³ and 4-1/2³ have self lubricating Bronze Bushing.

Fitted with 1-1/4³ ID Swivel Eye.

May be furnished in other rope sizes.

Note: When ordering, please specify: size, block number, hook or shackle, bronze bushed or roller bearing, and wire rope size.

Note: Tail Board does not contain the spool that is required with the hook (418) and shackle (419) snatch blocks.