Crosby

Crosby G 2130CT Colt-Tuff Bow Shackle Nut Bolt Type Bolt Type Anchor shackle with thin head bolt “ nut with cotter pin. Meets the performance requirements of Federal Specification RR-C2.7-1F Type IVA, Grade A, Class 3, except for those provisions required of the contractor. Forged “ Quenched and Tempered, with alloy bolt. G 2130 CT “ Carbon Steel G 2140 CT “ Alloy Steel Working Load Limit permanently shown on every shackle. Individually Serialized with Certification. Fatigue Rated (G 2130 CT only). Shackles 25t and larger are RFID EQUIPPED. All sizes are individually proof tested to 2.0 times the Working Load Limit. Finish is Inorganic Zinc Primer. Bow and Bolt are Certified to meet charpy impact testing of 42 joules (31 ft-lbs.) min. ave. at -20 degree C (-4 degree F). Individually Mag Inspected with certification. COLD TUFF shackles are suitable for use to -50 F. Refer to page 161 for COLD TUFF Master Links and Master Link assemblies. Type Approval and certification in accordance with DNV 2.7-1 Offshore Containers, and Rules for Certification of Lifting Appliances, DNV OS-101, and are produced in accordance with DNV MSA requirements, including required documents.

Crosby HR-1000 UNC heavy-duty 360 degree swivel hoist ring with forged bail. Manufactured in the USA it is a durable product, suited to use in demanding field conditions in capacities up to 24,000lb. The working load limit (WLL) and recommended torque value are permanently stamped into each washer; top washer is color coded.

Crosby M 279 Shoulder Type Machinery Eye Bolts PRODUCT DESCRIPTION Forged steel, Quenched and Tempered Working Load Limit shown is for in-line pull only Recommended for in-line pull (capacity is reduced with angular loads) Fatigue rated Metric threaded Satisfies ASME B30.26 requirements

Crosby Alloy Hook Latch Kits

Crosby HG 225 Hook and Eye Turn Buckles : Meets the performancerequirements of Federal Specifications FF-T-79lb, Type 1, Form 1 - Class 5,and ASTM F-1145, except for those provisions required of the contractor. Crosby Turn buckle assembly combinations include: Eye and Eye, Hook and Hook, Hook and Eye, Jaw and Jaw & Jaw and Eye. End fittings are Quenched and Tempered, bodies heat treated by normalizing.Crosby™s Quenched and Tempered end fittings are normalized bodies have enhanced impact properties for greater toughness at all temperatures. Hot Dip galvanized. Hooks are forged with a greater cross sectional area that results in a strongerhook with better fatigue properties. Modified UNJ thread on end fittings for improved fatigue properties. Body has UNC threads. Crosby HG 225 Turnbuckle eyes are forged elongated, by design, to maximize easyattachment in system and minimize stress in the eye. For turn buckle sizes 1/4" through 2-1/2", a shackle one size smaller can be reeved through eye. Forged jaw ends are fitted with bolts and nuts on sizes 1/4" - 5/8", andpins and cotter on sizes 3/4" - 2-3/4". Crosby HG 225 TURN BUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY. Lock Nuts available for all sizes. Typical hardness levels, Tensile Strengths and Ductility Properties are available for all sizes. Crosby HG 225 Turnbuckles can be furnished proof tested or magnaflux inspected with certificates if requested at time of order. Crosby products meet or exceed all the requirements of ASME B30.26including identification, ductility, design factor, proof load and temperaturerequirements. Importantly, Crosby products meet other critical performancerequirements including fatigue life, impact properties and material traceability,not addressed by ASME B30.26.

Crosby G 209 Bow Shackle Screw Pin Type PRODUCT DESCRIPTION Meets performance requirements of Grade 6 shackles Forged, Quenched & Tempered, with alloy pins Working Load Limit and Grade 6 permanently shown on every shackle Hot-dip galvanized (G) Sizes 3/8" and below are mechanically galvanized Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles Shackles 25t and larger are RFID equipped Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification; proof testing and certification available when requested at the time of order, charges will apply Approved for use at -40 C (-40 F) to 204 C (400 F) All 209 and 210 shackles can meet charpy requirements of 42 Joules (31 ft-lb) avg. at -20 C (-4 F) upon special request Meets or exceeds all requirements of ASME B30.26 Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for Certification of Lifting Appliances available; certificates available when requested at time of order and may include additional charges G-209 Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C-271G, Type IVA, Grade A, Class 2, except for those provisions required of the contractor Look for the Red Pin... the mark of genuine Crosby quality

G 2160 Wide Body Bow Shackle Design: Wide body shackle. Shackle with improved bow radius that greatly improves life of wire rope slings. Can be used to connect wire rope slings, high strength synthetic web slings or high strengths ynthetic round slings. Approved for use at 40 degree C to 204 degree C. Shackles 18t and larger have DNV Type Approval to Rules for Certification of Lifting Appliances, and are produced in accordance with DNV MSA requirements. Proof load: All 2160 shackles are individually proof tested and magnetic particle inspected. Sizes 300 metric tons and smaller are proof tested to 2 times the Working Load Limit, sizes 400 metric tons and larger are tested to 1.33 times Working Load Limit. Material: Forged alloy steel from 7 through 300 metric tons. Cast alloy steel from 400 through 1550 metric tons. Marking: According to standard, CE-marked, WLL. Shackles, 30t and larger, are RFID EQUIPPED. Finish: 7-55 tons are galvanized with painted pin. 75t and larger, bows are furnished Dimetcoted, and pins are Dimetcoted, then painted. Standard: EN 13889 Safety factor: 7-300 t 5:1 ; 400 t < 4,5:1.

The G 210 screw pin chain shackles meet the performance requirements of federal specification RR-C-271F Type IVA, Grade A, Class 2, except for those provisions required of the contractor. Capacities ranging from 500kg up to 55,000kg Forged - Quenched and tempered with alloy pins Working Load Limit and grade 6 permanently shown on every single shackle Hot dip galvanised or self-coloured Fatigue rated Shackles over 25,000kg are RFID-equipped (Radio Frequency Identification) Shackles can be provided proof tested with certificates to designated standards, Such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available at time of order, charges will apply Approved for use in extreme temperatures ranging from -40‹šC up to 204‹šC All Shackle can meet the Charpy requirements of 42 Joules (31ft-lbs) average at -20‹šC upon special request All shackles meet or exceed all the requirements of ASME B30.26 Type approval and certification in accordance with ABS 2006 steel vessel rules 1-1-17.7 and ABS guide for certification of cranes.

Crosby HG 227 Jaw and Eye Turnbuckles Meets the performance requirements of Federal Specifications FF-T-791b, Type 1, Form 1 ” CLASS 8, and ASTM F-1145, except for those provisions required of the contractor. End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing. Hot Dip galvanized steel. Turnbuckles eyes are forged and elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckles size 1/4³ through 2-1/2³, a shackle one size smaller can be reeved through eye. Forged jaw ends are fitted with bolts and nuts for 1/4³ through 5/8³, and pins and cotters on 3/4³ through 2-3/4³ sizes. Body has UNC threads.Modified UNJ thread on end fittings for improved fatigue properties. Meets or exceeds all requirements of ASME B30.26, including identification, ductility, design factor, proof load and temperature requirements. Importantly, these turnbuckles meet other critical performance requirements, including fatigue life, impact properties and material traceability, not addressed by ASME B30.26. TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY. Lock Nuts available for all sizes. Fatigue Rated.

Crosby G 209 R ROV Anchor Shackles are designed for efficient load handling by Remote Operated Vehicles (ROV) in subsea and other hard-to-reach applications. Size (Shackle Body Thickness): Subsea ROV 12 ton Working Load Limit (WLL): 12.00 tons (24,000 lbs) Pin Size: 1.38" Pin Type: Bolt & Cotter Throat Opening (Width Between Ears): 2.03" Throat Depth: 4.69" Material: Carbon Steel Body & Alloy Steel Pin Finish: Hot Dip Galvanized & Painted Forged Carbon Steel “ Quenched and Tempered, with alloy bolts Working Load Limit permanently shown on every shackle Fatigue rated Fatigue rated ROV shackle bows are galvanized, then painted fluorescent yellow Made in the USA

Crosby S 279 Shoulder Type Machinery Eye Bolts Forged Steel, Quenched and Tempered. Fatigue rated at 1-1/2 times Work Load Limit for 20,000 cycles. Work Load Limits shown are for in-line pull. For angle loading, See Eye Bolt Use Warning Information in Product Resources Crosby products meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Crosby products also meet other critical performance requirements including fatigue life, impact properties and material traceability not addressed by ASME B30.26. Recommended for in-line pull. S 279 threaded UNC.

Crosby Hr 1200 M Metric Side Pull Hoist Rings

Grade 80 Alloy Steel Shackles, We offer all types of D and bow Shackles of Crosby makes, CROSBY G 2130, CROSBY S 2130, CROSBY G 209, CROSBY S 209, CROSBY G 210, CROSBY S 210, CROSBY G 2150, CROSBY S 2150

Crosby G 2140 Bolt Type Alloy Anchor Shackles : Crosby G 2140 Bolt Type Alloy Anchor Shackles are Forged Alloy Steel 30 thru 175 metric tons. Cast Alloy Steel 200 thru 400 metric tons. Working Load Limit is permanently shown on every Crosby 2140 Bolt Type Alloy Anchor Shackles. All sizes of Crosby G 2140 Bolt Type Alloy Anchor Shackles are individually proof tested to 2.0 times the Working Load Limit. Pins of Crosby G 2140 Bolt Type Alloy Anchor Shackles are galvanized and painted red. Crosby G 2140 Bolt Type Alloy Anchor Shackles are Quenched and Tempered and canmeet DNV impact requirements of 42 joules at -20 C. Crosby G 2140 Bolt Type Alloy Anchor Shackles meet or exceed all requirements of ASME B30. 26 including identification, ductility, design factor, proof load and temperature requirements. Crosby 2140 Bolt Type Alloy Anchor Shackles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26. Shackles 200 metric tons and larger are provided as follows. Serialized Pin and Bow Material Certification (Chemical) Magnetic Particle Inspected. Certification must be requested at time of order. Type Approval and certification in accordance with ABS 2006 SteelVessel Rules 1-1-17.7, and ABS Guide for Certification of Cranes.

Crosby G 2130 Round Pin Carbon Anchor Shackles : Forged Quenched and Tempered, with alloy pins. Working Load Limit permanently shown on every shackle. Hot Dip galvanized or Self Colored. Fatigue rated. 25t and larger are RFID EQUIPPED. Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Charges for proof testing and certification available when requested at the time of order. Quenched and Tempered and can meet DNV impact requirements of 42 joules (31 ft-lbs) at -20 degree C (-4 degree F).

Crosby G 2150 D shackle Nut Bolt Type Forged Quenched and Tempered, with alloy pins. a working Load Limit permanently shown on every shackle. Crosby 215 Shackles are Hot Dip galvanized or Self Colored. Crosby 215 Shackles are Fatigue rated. Shackles 25t and larger are RFID EQUIPPED. Crosby 215 Shackles can be furnished proof tested with certificates to designatedstandards, such as ABS, DNV, Lloyds, or other certification. Charges forproof testing and certification available when requested at the timeof order. Crosby 2150 Shackles are Quenched and Tempered and can meet DNV impactrequirements of 42 joules (31 ft-lbs.) at -20 degree C (-4 degree F).

Crosby G 450 Wire Rope Clamp Crosby G 450 Forged Wire Rope Clips Crosby Clips, all sizes 1/4³ and larger, meet the performance requirements of Federal Specification FF-C-450 TYPE 1 CLASS 1, except for those provisions required of the contractor. Each base has a Product Identification Code (PIC) for material traceability, the name CROSBY or CG, and a size forged into it. Based on the catalog breaking strength of wire rope, Crosby G 450 wire rope clips have an efficiency rating of 80% for 1/8³ “ 7/8³ sizes, and 90% for sizes 1³ through 3-1/2³. Entire Clip-Galvanized to resist corrosive and rusting action. Sizes 1/8³ through 2-1/2³ and 3³ have forged bases. All Clips are individually bagged or tagged with proper application instructions and warning information. Clip sizes up through 1-1/2³ have rolled threads. Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these wire rope clips meet other critical performance requirements, including fatigue life, impact properties and material traceability, not addressed by ASME B30.26. Look for the Red-U-Bolt, your assurance of Genuine Crosby Clips.

Crosby SS 450 Stainless Steel Wire Rope Clamp Description Each base has a Product Identification Code (PIC) for material traceability, the name CROSBY or "CG, and a size forged into it. Entire clip is made from 316 Stainless Steel to resist corrosive and rusting action. All components are Electro-Polished. All Clips are individually bagged or tagged with proper application instructions and warning information.

Crosby G 429 Fist Grip Clips PRODUCT DESCRIPTION Entire clip is galvanized to resist corrosive and rusting action Achieves 80% efficiency of published wire rope breaking strength Bolts are an integral part of the saddle Saddle is made from forged steel Nuts can be installed in such a way as to enable the operator to swing the wrench in a full arc for fast installation Assembled with standard heavy hex nuts Satisfies ASME B30.26 requirements Meets Federal Specification FF-C-450 Type III, Class 1

Crosby US 422 T Utility Wedge Sockets Basket is cast steel and individually magnetic particle inspected. Wedge socket terminations have an efficiency rating of 80% based on the catalog strength of XXI wire rope. Wedges are color coded for easy identification Blue “ largest wire line size for socket. Black “ mid size wire line for socket. 7/16 on US4 9/16 on US5 Orange “ smallest wire line size for socket. Cast into each socket is the name "McKissick, "Crosby or "CG, its model number and its wire line range. By simply changing out the wedge, each socket can be utilized for various wire line sizes (Ensure correct wedge is used for wire rope size). Cast into each wedge is the model number of the socket and the wire line size for which the wedge is to be used. Load pin is forged and headed on one end. Incorporates Crosby™s patented QUIC-CHECK "Go and "No-Go feature cast into the wedge. The proper size rope is determined when the following criteria are met: 1) The wire rope should pass thru the "Go hole in the wedge. 2) The wire rope should NOT pass thru the "No-Go hole in the wedge. US-422T wedge sockets contain a hammer pad (lip) to assist in proper securement of termination. Meets or exceeds all requirements of ASME B30.26 including identification, ductilit , design factor, proof load and temperature requirements. Importantly, these sockets meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26. UWO-422T Wedges are to be used only with the US-422T Wedge Socket Assemblies.

Crosby HG 223 Hook and Hook Turnbuckles Meets the performance requirements of Federal Specifications FF-T-791b, Type 1 Form 1 ” CLASS 5, and ASTM F-1145, except for those provisions required of the contractor. End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing. Hot Dip galvanized steel. Hooks are forged with a greater cross sectional area that results in a stronger hook with better fatigue properties. Meets or exceeds all requirements of ASME B30.26, including identification, ductility, design factor, proof load and temperature requirements. Importantly, these turnbuckles meet other critical performance requirements, including fatigue life, impact properties and material traceability, not addressed by ASME B30.26. TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY. Modified UNJ thread on end fittings for improved fatigue properties. Body has UNC threads. Lock Nuts available for all sizes. Fatigue Rated.

Wire Rope Sling

Crosby G 414 Wire Rope Thimbles

Crosby G 400 Forged Eye Nuts

Crosby L 320 R Rov Eye Hooks

Crosby Bullard Golden Gate Hooks

Crosby G 291 Forged Eye Bolts

Crosby HR-1000 metric heavy-duty 360 degree swivel hoist ring with forged bail. Manufactured in the USA it is a durable product, suited to use in demanding field conditions in capacities up to 13,750kg. The working load limit (WLL) and recommended torque value are permanently stamped into each washer; top washer is color coded.

Product description The new design offers the reliability of standard McKissick folding blocks, making this series the ideal choice for heavy-duty applications, such as use on tugger winches or rigging. - Galvanized surface. - Blocks of 203 mm and 254 mm are suitable for two rope gauges. - Swivels, connectors, hook bearings and shackles made of hardened and tempered forged steel. - Easy maintenance thanks to rope sheave lubrication via centrally mounted nipple. - Safety factor of 4:1. - All blocks 356 mm and larger feature McKissick Roll Forged„ sheaves with flame-hardened groove. - Recessed side sections reduce the gap between the sheave rim and side section, so the sheave will not fall out of the block even if the center pin is lost. - Encapsulated tapered sheave bearings increase pin and bearing life. At the same time, this allows higher rope speeds than with conventional folding blocks. - Easy positioning due to swivel shackles. - Suitable for passenger transport provided all personnel, including the winch operator, have been trained to follow all applicable national, local and industry guidelines. 1.) Applications on tugs/load cranes: API RP54 2.) Applications on rigs: OSHA Directive CPL 2-1.36 - Openings in side panels for attachment of a second device to secure block. - Manufactured in a factory certified to API Q1. - Type approved and certified in accordance with ABS 2006 Steel Vessel Rules 1-1-17.7 (Regulations for Steel Vessels) and ABS Guide for Certification of Cranes. - All sizes equipped with RFID.

Crosby Shank Hooks

Crosby Hg 228 Jaw and Jaw Turn Buckles End fittings are Quenched and Tempered; bodies are heat treated by normalizing. Hot Dip galvanized steel. Forged jaw ends are fitted with bolts and nuts for 1/4 through 5/8 and pins with cotters for 3/4 through 2-3/4 sizes. Modified UNJ thread on end fittings for improved fatigue properties. Body has UNC threads. Crosby products meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability not addressed by ASME B30.26. TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY. Lock Nuts available for all sizes. Fatigue Rated.

Crosby HG 226 Eye and Eye Turnbuckles Meets the performance requirements of Federal Specifications FF-T-791b, Type 1, Form 1 ” CLASS 4, and ASTM F 1145, except for those provisions required of the contractor. End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing. Hot Dip galvanized steel. Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckle sizes 1/4³ through 2-1/2³, a shackle one size smaller can be reeved through eye. Modified UNJ thread on end fittings for improved fatigue properties. Body has UNC threads. Meets or exceeds all requirements of ASME B30.26, including identification, ductility, design factor, proof load and temperature requirements. Importantly, these turnbuckles meet other critical performance requirements, including fatigue life, impact properties and material traceability, not addressed by ASME B30.26. TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY. Lock Nuts available for all sizes. Fatigue Rated.

Crosby G 341 Alloy And Carbon Pear Shaped Links

Crosby S 421 T Wedge sockets Features Secures the tail or "dead end of the wire rope to the wedge, thus eliminates loss or "Punch out of the wedge. Eliminates the need for an extra piece of rope, and is easily installed. The TERMINATOR„ wedge eliminates the potential breaking off of the tail due to fatigue. The tail, which is secured by the base of the clip and the wedge, is left undeformed and available for reuse. Incorporates Crosby™s patented QUIC-CHECK„ "Go and "No-Go feature cast into the wedge. Utilises standard Crosby Red-U-Bolt wire rope clip. Generates a minimum efficiency of 80% based on the catalogue breaking strength of the wire rope. Pin diameter and jaw opening allows wedge and socket to be used in conjunction with open swage and spelter sockets. Wedge sockets meet the performance requirements of Federal Specificatio RR-S-550F, Type C, except those provisions required of the contractor.

Crosby HR 500 Trench Cover Hoist Rings

Crosby Hr 100 M Pivot Hoist Rings

Crosby SS 125 Stainless Steel Swivel Hoist Rings

Mckissick Easy Reeve Crane Blocks

Crosby 1316 Grade 100 Shur Loc Hooks

Crosby 322 Swivel Hooks

Crosby S 3322 Swivel Hooks with Bearing

Mckissick S 1316 A Suhr Loc Eye Hook

Crosby Hr 125 M Swivel Hoist Ring These swivel hoist rings with metric threads provide a reliable and durable solution for lifting and rigging applications, make sure safety and ease of use in various operations.

Crosby Swivel Hoist Ring HR-125 has UNC standard threading. It is a multi-purpose attachment point. It has 360 Swivel and 180 Pivot action, and is rated at 100% Working Load Limit at a 90 angle. The Swivel Hoist Ring is made of Alloy Steel, Quenched and Tempered, with a 5:1 Safety Design Factor.

Proper design, careful forging and precision controlled quenched and tempering give maximum strength without excessive weight and bulk. Hook extra marked with Deformation Indicators “ Two strategically placed marks, one below just the shank or eye and the other on the hook tip, which allows for a QUIC-CHECKTM measurement to determine if the throat opening has changed, thus indicating abuse or overload. To check, use a measuring device to measure the distance between the marks. If the measurement does not meet the dimensions shown below (Deformation Indicator AA), the hook should be inspected further for possible damage. Hook extra marked with Angle Indicators “ Indicates the maximum included angle which is allowed between two (2) sling legs in the hook. Also Available in Alloy steel Grade 8. Replacement Latch Kit S-4320 for 0.75 ton hooks up to 15 ton hooks. Latch Kit PL for 3.2 ton hooks up to 40 ton hooks. Material: Carbon steel Marking: According to standard, CE-marked Standard: EN 1677-5 Safety factor: 5:1 Grade: 6

PRODUCT DESCRIPTION Forged alloy steel, Quenched and Tempered Individually proof-tested at 2-1/2 times Working Load Limit with certification Quick and easy assembly IF USED WITH GRADE 80 OR GRADE 100 CHAIN SLINGS, WORKING LOAD LIMIT OF CHAIN MUST BE DOWNRATED TO COMPENSATE FOR REDUCED CAPACITY OF THE A-336 CONNECTING LINK

Crosby McKissick 418 Snatch Block with hook. Unique opening feature permits insertion of rope while block is suspended from gin-pole or other mounting. Sheave runs on bronze bushing or roller bearing with integral pressure lube fitting. RFID equipped for worksite traceability. Opening feature permits easy insertion of rope without reeving, or while the block is suspended. Forged steel swivel tees, yokes and shackles. "All Alloy" snatch blocks feature a significant reduction in weight. All sizes feature sheave grooves suited for a range of wire line diameters. Center pin equipped with pressure lube fitting. Bolt for opening feature is retained, to ensure no lost bolts in the field.

Crosby McKissick 419 Snatch Block with shackle fitting. Unique opening feature permits insertion of rope while block is suspended from gin-pole or other mounting. Sheave runs on bronze bushing or roller bearing with integral pressure lube fitting. RFID equipped for worksite traceability. Opening feature permits easy insertion of rope without reeving, or while the block is suspended. Forged steel swivel tees, yokes and shackles. "All Alloy" snatch blocks feature a significant reduction in weight. All sizes feature sheave grooves suited for a range of wire line diameters. Center pin equipped with pressure lube fitting. Bolt for opening feature is retained, to ensure no lost bolts in the field. Models with sheave diameters from 3" to 18" available.

Suitable for hoisting personnel, contingent upon all employees, including the winch operator, being trained to follow any applicable Federal, local and industry standards. Design: Recessed sideplates design reduces the gap between the sheave rim and the sideplate. Sealed tapered roller bearings. Shackle fitting swivels for easy positionering. Holes through side plate are available for secondary block securement device. Material: Forged steel swivels, tees, yokes and shackles are Quenched & Tempered Marking: WLL Finish: Painted. Galvanized upon request Safety factor: 4:1

Entire block made from heat treated alloy steel Use of heat treated alloy results in a 40% reduction in weight from blocks of comparable capacities Easy opening feature of "Champion" blocks retained Pressure lube fittings Can be furnished with hook latch